How to Make a Simple, Low-Cost Solar Power Generation System?

As we all know that solar energy is an inexhaustible green energy, about 40 minute-solar energy exposing on the Earth is sufficient for the energy consumption of the world for one year. The application of the solar energy in the large-scale can not only solve the current energy crisis, but also can save our electricity expenditure. Anyway, do not think that the application of the solar energy is far away from our daily lives. At present, it is not difficult to find the solar energy-charged cell phone in mobile phone products. And there are also solar chargers, solar lamps, solar bus stops, etc in our daily lives. Other applications of the solar system such as solar water heaters, solar air-conditioning, and solar cook stoves and so on are also very frequently used.
The following is a simple, low-cost solar power generation system designed by us.
Materials: Several 6V or 12V single crystal silicon solar generating panels (10-50 blocks, according to the demand of the usage) Two 6V or 12V maintenance-free storage batteries One 220V inverter Above are all we need.
Step One: We need to divide the solar panels into two groups, if it is the 6V generating panels; we need to wire two panels in series to raise the voltage up to 12V, and others also need to be wired in series as the first two pieces, and then wire those groups of panels in parallel to increase the current power of the generation set. And then, install the fixed power generation panels to the metal plate, and install two sets of power generation groups to different positions (in order to absorb the sun light well. Because of low-cost, we can't make the sunlight-tracking system and it is a little difficult to make it).
Step Two: Connect the electrode leads of the power generation set to the positive and negative electrodes of the storage battery, so that the storage battery can continuously get the charging energy (in order to protect the battery, the overcharge or over-falling protection system can be added). Then wire two sets of storage batteries in parallel to increase the current of the battery.
Step Three: Next, we need to convert 12V DC to our appliances used 220V AC, which will require the inverter. Connect the battery power leads to 220V inverter.
Finally, after the conversion of the adequate sunlight, the power connected by the inverter can be used for domestic lighting equipment.
This system is very flexible, you can increase the solar panels and batteries to obtain more energy, so that your computer, televisions, refrigerators and even air conditioning can be carried out through the solar energy.
Just Click Here to find out the best way to build your own solar power system!